SnapNrack Roof Rack Parts; Residential Solar Mounting Solutions
SnapNrack 100 Roof Mount Hardware
The SnapNrack Series 100 Roof Mount System is engineered to optimize material use, labor resources and aesthetic appeal. This innovative system simplifies the process of installing solar modules, shortens installation times, and lowers installation costs; maximizing productivity.
The SnapNrack Series 100 Roof Mount System boasts unique, pre-assembled, stainless steel “Snap-In” hardware and watertight flash attachments. This system is installed with a single tool. No cutting or drilling means less rail waste. It is fully integrated with built-in wire management, solutions for all roof types, one-size-fits-all features, and can withstand extreme environmental conditions. Series 100 is listed to UL Standard 2703 for Grounding/Bonding, Fire Classification and Mechanical Loading.
SnapNrack Series 100 Solar Panel Mounting System offers a low profile, visually appealing, solar (PV Means Photovoltaic) module installation system. This innovative system simplifies the process of installing solar PV modules, shortens installation times, and lowers installation costs. SnapNrack systems, when installed in accordance with this manual, will be structurally adequate for the specific installation site and will meet the local and International Building Code. Systems will also be bonded to ground, under SnapNrack’s UL 2703 Listing.
|SnapNrack 100 Rails|
|Rail sets consist of two, or six rails and are offered in two lengths to simplify planning. Black and silver rails give a clean and polished look to the system. Mill [Clear / Silver] finish offers a lower cost option.|
SnapNrack rack parts are normally in stock and ship in 3 - 5 business days after funds clear.
|SnapNrack Module Attachments Grounding [Bonding] Mid & End Clamps, Wire Clips & L Feet|
|Module Clamps are available in several sizes to accommodate a wide range of solar module frame thicknesses. The Universal End Clamp is a unique one-size-fits-all time saver that slips inside the module frame – completely out of sight.|
|Grounding Lugs, SnapNrack Bonding Standard Rail Splice, Microinverter Mounting Kit,|
|Grounding Lugs; The Ground Lug is a fully custom solution for grounding each row of contiguous modules. SnapNrack rail splices contain an insert with integral bonding pins in assembly to properly bond the system. SnapNrack attachment accessories for attaching Micro Inverters & Optimizers directly to SnapNrack rails.|
|Flush Mount Standoffs|
|Quick Mount PV's QBase Low Slope Mount takes the traditional base-and-post PV mount to its ultimate level. It's the strongest you can buy for mechanically attaching residential and commercial solar systems to TPO, PVC, EPDM, built-up asphalt, and virtually all other non-metal low-slope roofs (aka 'flat roofs') used in residential and commercial roofing.|
|Roof Anchors / Attachments; QuickMount, SnapNRack, S-5|
|Quick Mount PV is a industry leader in 100% code-compliant, watertight solar roof mounts. SnapNrack is a leading manufacture of solar panel racking systems offering some unique attachment solutions. S-5! clamps attach to the metal roof panel seam by the tightening of two "bullet-nosed" stainless steel setscrews against the seam material. (This is usually done with an industrial grade screwgun.) The setscrews compress the seam material against the opposite wall of the clamp. They will "dimple" the seam material, but will not penetrate it. Threaded holes in the clamp (and stainless hardware provided) enable the easy attachment of various ancillary items to the clamps.|
Roof Racking SnapNrack Rack Parts
The SnapNrack Roof Rack installation system is a set of engineered components that can be assembled into a wide variety of solar mounting structures. With SnapNrack you will be able to solve virtually any PV module mounting challenge.
SnapNrack was developed by a team of veteran solar engineers working with installers in the field to ensure quick, efficient installation. It simplifies and reduces the cost of the solar installation process. SnapNrack is a top-down roof mounting solution, load-tested and engineered for up to 150 mph wind loads. The rail is a lightweight anodized aluminum extrusion that is easy to transport, handle, and install. SnapNrack is compatible with modules from virtually any manufacturer. Snap-in sliding channel nuts ensure quick and easy installation and precise alignment of module clamps. Mid-clips are ½" wide to simplify layout calculations. Every bolt in the system uses the same size wrench, ensuring efficient installation and reducing man-hours on the roof. Standoffs and L-feet connect to the rails using the same snap-in channel nuts as the module clamps, no drilling required. Channels in the rail profiles can be used for clean, simplified wire management. SnapNrack is engineered for durability and structural integrity in all environments, providing excellent seismic, wind, and snow loading protection on all components. Its compact and efficient rail design reduces material requirements and ensures a low profile installation on any roof. SnapNrack has been engineered from the ground up to ensure maximum standoff adjustability for a clean, level installation even on uneven roof surfaces. Tilt-up can be achieved with pieces of cut rail and the tilt leg kit. Rails and components are covered by a 20-year warranty.
SnapNrack roof rack system is a flexible and straightforward roof mounting solution for a wide variety of solar needs.