Off Grid Recommendations: Midnight Battey Montering Kit or Midnight Automatic Generator Start Modile
[See Related Items Below] Solar panel roof or ground racks and batteries are site specific options that are not included with the base package. Scroll down the page to view options.
* (MNEAC30-2P Included) 30A/2P Breaker installed on power center on site by others for supplementary protection. These breakers are rated for continuous duty and are used as AC out disconnects as specified on the line drawing supplied.
RECOMMENDATION - Keep the number of parallel strings of batteries to three or fewer. More than three strings of batteries will shorten your battery life due to uneven charging. That means use higher AH 6VDC or 2VDC batteries for fewer strings. Batteries in Series = Voltage is Additive; Batteries in Parallel = Ah is Additive.
Solar Production = 20,700 Watts Per Day ● Assumptions: 345 Watt STC Watts Panel Rating [Factory Rating] @ 4.0 Sun Hours (Dec).
Technical Specifications: MNEMS4448PAECL150 Power Center ● 48 VDC Battery Based Inverter. 120/240 VAC Output, Continuous Inverter AC Output Current 30 AAC ● Charge Controller MidNite Classic 150 (Solar) Voltage: 150.00 Volts + HyperVOC; Max Output (Battery) Current: 86.00 Amps. ● 120/240 VAC Generator Compatible ● E-Panel includes a mounting bracket, 1 Magnum Energy MS4448PAE 120/240 48VDC inverter/charger, 1 Classic 150 Charge Controller, ME-ARC50 Display, MNE175STM-240 E-Panel, 3 MNSPD Surge Protector, Battery and Solar Array Breakers, Solar GFDI, Input-Output-Bypass Assembly, Mounting Locations for Additional AC breakers.
IMPORTANT: Amps AC Out; Define Your Needs: A Single Magnum inverter's continuous AC output current is limited to 30AAC. The concern here is that the combination of your normal loads (Not Surge Loads) might exceed the inverters output current rating (Amps Out) on larger solar systems. It is critical in the design selection that you make sure the continuous AC load combination of your power requirements is at or below the 30AAC output limit of the single Magnum inverter in these kits.
The MidNite Solar E-Panel Kit is ideal for medium-size solutions: homes, farms, small businesses and backup power systems, with all necessary components integrated into a compact hang-on-the-wall system with a minimal footprint.
● Factory Tested, Pre-wired and Pre-Configured Power Center
● Off-grid, Backup, Generator and On-Grid Functionality in One Pre-Engineered Package
When the MNEMS4448PAECL150 power center is properly connected to batteries and turned on, the direct current (DC) from the batteries is transformed into a pure sine wave alternating current (AC). This AC is similar to the voltage provided by your utility, and is used to power the electrical appliances (i.e., AC loads) connected to the inverter’s output.
When an external source of AC power (e.g., utility power or generator) is connected and qualified on the inverter’s AC input, it operates in Standby mode. In Standby mode, the unit operates as a battery charger to convert the incoming AC power into DC power to recharge the batteries; while at the same time, an internal AC transfer relay is automatically closed and passes the incoming AC power directly to the inverter’s output to continue powering the connected electrical appliances.
The MidNite Solar E-Panel 6,210 Watt MNEMS4448PAECL150 kit can be used for backup power in a permanent location that normally uses utility power, such as a home or office. When utility power is available, the inverter keeps the batteries charged. When the utility power fails, the inverter comes on automatically to supply AC power to your home or office during the power failure. For a home or business, reliable backup power is needed to prevent lost computer data, or to maintain lights and keep food fresh in the refrigerator/freezer.
Line drawing questions or just stuck? No worries we have your back and will be here to help whenever you have questions about your purchased Kit. For orders larger than $2,000.00 a Technical Sales Team Group Captain will be assigned your account. Your Technical Advisors job is to coordinate all parts and pieces of your order and to work with you throughout the process. This support helps because we will be providing you with a single contact point to call with your questions. Your technical support contact does not replace the maufactures technical support. DIY means you accept the responsiblity of reading and following the line diagram and other installation documents prior to tackling the installation.
NOTE: For detail support after installation customer must be willing or have the ability to connect to the Magnum network monitoring platform. Installed on the Magnum network, the MagWeb provides live Internet monitoring of the inverter, battery monitor, and automatic generator start module. Using your always on Internet connection, the MagWeb makes live and historical conditions available to you through a web browser. (Optional Accessory) .
Blue Pacific Solar® SolarEdge Kit is featured with Mission panels. Mission Solar Energy, proudly assembled in the USA, is headquartered in San Antonio, TX with module facilities onsite. Mission Solar hardworking team calls Texas home and is devoted to producing high quality solar products. Our supply chain includes local and domestic vendors. 25 Year Warranty, UL Listed.