MidNite Solar 2.4 kW Off-Grid
Micro Kit for Small Cabin


Walk like your Happy


Line Drawing
w/ Each Solar Kit

MidNite Solar Off-Grid Cabin 2.4 kW Pre-Engineered Micro Kit

  • 2400 Watt 24 VDC Battery Based Kit for Small Homes or Cabins
  • MidNite Micro Off-Grid kit offers an ideal battery based solution for smaller flexible NEC code compliant systems. We have taken the world’s most popular solar products and put together this pre-engineered NEC code compliant expandable system that you can assemble and install. This system is designed for a very simple assembly and wiring of the load center on site using a few household tools saving you thousands of dollars. Methodically engineered, every component of this kit has been specially selected to assure the highest performance in a safe and simple-to-install package. This micro-off-grid power system is sometimes an ideal applications such as small cabins or tiny homes and will save you both time and money.
  • Only:

    Buy Now
Roof Mounting -- Ground Mounting -- Batteries

What's On the Truck MidNite Solar

● P/N MIDMS-24-2400 - MidNite Solar Micro Off-Grid 2.4 kW [ ⇧ Assembley Req. Reference Schematic Tab] Battery Based Kit

  • 8 - Mission, 300W Solar Panels Black Frame Mono-Perc MSE300SQ5T
  • 4 - PV Wire 50' Cable Extension, 10AWG, UL4703
  • 1 - MidNite Solar MNPV6, 6 Position Combiner Box
  • 4 - MidNite Solar MNEPV15 - 15 amp DC Breaker 150VDC DIN
  • 2 - Midnite Solar MNSPD300-DC Lighting Arrestor
  • 1 - Midnite Solar, Classic 150, MPPT Charge Controller, 150VDC, 96A, 12-93V Battery, with BTS & LCD, Arc-fault Protection, CLASSIC 150
  • 1 - MidNite Solar, MNCCB-R, E-PANEL Right Side Single Classic Charge Controller Mounting Plate
  • 1 - Midnite MNDC-15 Load Center Circuit Breaker Box for 15 Panel Mount and One Large Panel Mount Breaker
  • 1 - MidNite MNBCM Voltmeter Battery Capacity Meter
  • 1 - Circuit Breaker, MIDNITE, 1A 120VAC/150VDC, 1-POLE, Panel Mount (Meter Breaker)
  • 1 - Circuit Breaker, 100A 150VDC, 1-POLE, MIDNITE MNEDC100 Panel Mount (Classic 150 Controller)
  • 1 - Circuit Breaker. OUTBACK PNL-20-AC/DC, DC Ground Fault Protector, 20A 150VDC, 1-POLE, Panel Mount (PV Array)
  • 1 - Midnite MNEDC175 Battery/Inverter Circuit Breaker, Panel Mount (Battery / Inverter)
  • 1 - MNBreaker Protecter The MidNite Solar MNBreaker Protector
  • 1 - Midnite, MNDC-GFP80, DC Ground Fault Protector, 80A 150VDC, 1-POLE, Panel Mount (PV Array Protection)
  • 1 - BUSBAR, Midnite Solar, BIG BUSBAR, 5-STUD Battery Terminal (Battery / Inverter Neg)
  • 2 - BUSBAR, Midnite Solar, MNSBBR, Terminal Red
  • 1 - BUSBAR, Midnite Solar, MNSBBB, Terminal Black
  • 1 - BUSBAR, Midnite Solar, MNGBB, Ground
  • 1 - Multi-Contact MC4 Unlocking Tool
  • 8 - Strain Relief, Cord Grip, 1-Hole for 5 to 12mm (.200” - .472”) OD Wire, 1/2” with locknut
  • 2 - Battery Cable, Code Approved THW, Black, 2/0 x 10'
  • 1 - Line Drawing; Full Instructive Three-Line Diagram of Entire DC Circuit, as Well as AC Lines to the optional inverter.


● Click on Schematic Tab ⇑ (above) "What's On the Truck" and below picture above to learn more about the MidNite Mico Kit.

midnite solar System Ships in Approximately 5 - 20 Business Days After Funds Clear. (NOTE: Power Center & Charge Controller Subject to Seasonal Increases 10 to 30 Business Days) ● Line Drawing send via Email [PDF] 5 - 20 business days after funds clear.

midnite solar [See Related Items Below] midnite solar Solar panel roof or ground racks, batteries and Optional AC inverter for this Micro kit are site specific options that are NOT included with the base package. Additionally the inverter is not included in the base package because many cabin owners have asked they be allowed to supply their own inverter.

building pv READ THIS PLEASE! A full instructive three-line wire diagram [See Schematic Tab ⇧] of entire DC circuit, as well as AC lines to the Optional Inverter is included but field assembly of all the components listed is by others (Ships Unassembled). Blue Pacific Solar will provide the PV wire to the edge of the array. All other wire / conduit and battery interconnect cables are not included. Optional AC inverter midnite solar (See Below), 120 VAC 15 AAC panel mount breakers and 120 VAC outlet (s) are not included. Panel mount breakers are single-pole ¾" wide breakers with ¼" stud connections and require ring terminals on wires connected to them. Ring terminals and connecting AWG CU wires are not included and are readily available at your local hardware store. NOTE: This micro kit can be wired using the outlet example on the schematic page above but can also be wire into your cabins AC breaker panel [Breaker Panel Only IF you select the Optional Magnum 120 VAC Inverter]. [If you select the optional inverter or provide your own]. We will draw into the custom line drawing we provide with either option, your choice.

Configuration Overview - Off-Grid Micro Applications for Small Cabin

MidNite Solar


MidNite Solar RECOMMENDATION - Keep the number of parallel strings of batteries to three or fewer. More than three strings of batteries will shorten your battery life due to uneven charging. That means use higher AH 6VDC or 2VDC batteries for fewer strings. Batteries in Series = Voltage is Additive; Batteries in Parallel = Ah is Additive.

Micro Off-Grid Small Cabin Solution w/ Mission US Made Mono Panels

OutBack Power Solar Production = 9,600 Watts Per Day ● Assumptions: STC 300 Watt Panel Rating [Factory Rating] @ 4.0 Sun Hours (Dec). Sun Hours should reflect the average value of total solar energy received in peak-sun-hours per day on an optimally-tilted surface during the month with the lowest solar radiation (not the yearly average). This is the best number to use in off-grid system design where the electrical demand is continuous or is not expected to vary seasonally and the system must be designed to operate year-round.

IMPORTANT: Amps AC Output & the difference between an inverter and inverter/charger. # 1; Define Your Load Amp Requirements. Make sure the optional inverter you choose has sufficient AC output amps to handle the load you are requiring of your electrical demand. The concern here is that the combination of your normal loads (Not Surge Loads) might exceed the inverters output current rating (Amps Out). It is critical in the design selection that you make sure the continuous AC load combination of your power requirements at the site is at or below the rating of the optional 120 VAC inverter you choose. #2; Not all inverters can be used as chargers which suppliment your battery bank recharge in conjunction with a locally supplied generator. Make sure you consider that when you select an inverter VS an inverter/charger. (IE: Samlex AC inverters (Option Below) are not inverter/chargers and will not work with a generator or a main panel. The Samlex AC inverters come with 120 VAC outlets on the inverter.) midnite solar

Blue Pacific Solar® MidNite Micro Kit is an ideal solutions for some small cabins. You supply a few simple tools, localy sourced wire and conduit as well as the brow sweat to assemble and install and we will supply the instructions with all necessary solar components integrated into a compact NEC code compliant system with a minimal footprint.

MidNite MNDC15 Load Center

The MidNite MNDC15 is a general use indoor rated enclosure / load center that will hold up to 15 MNEDC type panel mount breakers, and one larger 175 amp battery on the end. The MidNite MNDC15 load center comes disassembled and pre-engineered with one goal in mind, making these smaller cabin or tiny house systems less expensive, NEC code compliant for a fast and easy off-grid application. Choose either optional roof, ground or pole mount rack which will save you both time and money. As with all Blue Pacific Solar® kits, we provide a custom line drawing showing you the wire size you will need and how to connect all the parts. Additionally our Technical Sales staff is standing by to provide competent support that is as close as your telephone.

MidNite Solar Classic 150 Charge Controller

The Midnite Solar Classic 150 MPPT battery charge controller substantially increases the flexibility, features and range currently found on all other MPPT controllers. The Team Members at Blue Pacific Solar® love specifying Midnite solar products in many of the systems we design. Why? Well frankly because they are American made and MidNite products are designed for the most durable off-grid conditions by engineers that are not afraid to get their hands dirty... plus they just plain work well.

Personal Technical Advisor

Line drawing questions or just stuck? No worries we have your back and will be here to help whenever you have questions about your purchased Kit. For orders larger than $2,000.00 a Technical Sales Team Group Captain will be assigned your account. Your Technical Advisors job is to coordinate all parts and pieces of your order and to work with you throughout the process. This support helps because we will be providing you with a single contact point to call with your questions. Your technical support contact does not replace the maufactures warranty technical support. DIY means you accept the responsiblity of reading and following the line diagram and other installation documents prior to tackling the installation.

Mission Solar Panels 18.1% Panel Efficiency

Blue Pacific Solar® SolarEdge Kit is featured with Mission panels. Mission Solar Energy, proudly assembled in the USA, is headquartered in San Antonio, TX with module facilities onsite. Mission Solar hardworking team calls Texas home and is devoted to producing high quality solar products. Our supply chain includes local and domestic vendors. 25 Year Warranty, UL Listed.

System Qualifies - 26% Federal Solar Tax Credit

    tax credit Federal Solar Tax Credit

    The federal solar tax credit, also known as the investment tax credit (ITC), allows a taxpayer to claim a credit of 26 percent for a qualified system located in the USA and that is owned and used as a residence by the taxpayer.

Optional Accessories

  • midnite solar MNEDC-15 - CIRCUIT BREAKER, 15A 120VAC/150VDC, 1-POLE, PANEL MOUNT, MIDNITE, MidNite’s breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting. These 120 VAC 15 AAC breakers are used for locally supplied 120VAC outlets wired directly to the load center instead of a breaker box.
Technical Support


Blue Pacific Solar Products, Inc. BBB Business Review