Hybrid Solar Wind Off-Grid Kit / Prim1524AE-1000
- Hybrid PV / Turbine System
- Primus AIR 40 is the premier micro-wind turbine for land-based hybrid applications. It operates efficiently across a wide-range of wind speeds and is ideal for pairing with solar to offset seasonal variation, delivering more consistent energy. We have matched the Primus AIR 40 with a pre-wired Magnum / MidNite Solar power center. Together this is a fabulous AC Modified Sine Wave kit that combines one of the worlds best top brand inverters with the high quality Canadian Solar panels. The AIR 40 is an ideal wind turbine for hybrid systems with solar to offset those cloudy or wintery periods. AIR 40 is built and backed by the worldwide leader in small wind. Mechanically and electrically engineered, every component of this kit has been specially selected to assure the highest performance with this safe simple-to-install kit. Magnum Energy, Canadian Solar panels, and MidNite combiner box, lighting arrestor and breakers.
- Only: Buy Now
- Product Details:
- Resource Documents:
MidNite Magnum Energy / Primus Wind Turbine Hybrid Off-Grid Kit
|Power Center/ Wind Turbine Model||Part Number||Solar Daily Watts Based on 5 Sun Hours (*STC)||Wind Daily Watts @ 13 MPH||Voltage DC/AC||Type||Inverter|
Primus Air 40
|Prim1524AE-1000||5,000 Watts||1,440 Watts||24 / 120||Off-Grid||MAGNUM 1524AE|
* STC or "Standard Test Conditions" enables solar panel manufactures and consumers to compare how different solar panels perform under the same condition when tested under uniform controlled factory conditions. STC may not represent real world performance which may vary with amount of local solar irradiance, temperature and other factors.
This off-grid kit is ideal for applications with smaller power requirements such as off-grid cabins, and limited back-up power systems. Utilizing a compact design and an easy-to-install mounting bracket, the fully pre-wired and tested Magnum / MidNite e-panel power center is designed for a quick installation, saving both time and money with just a few household tools. The pre-wired power center with MidNite Solar Classic 150 maximum power point tracking offers an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from your Canadian Solar array.
The Magnum MM1524AE is designed for use with 24V battery system and no more than 1,500 watts continous power demand. This MidNite Solar; Magnum Energy / Canadian module kit is expandable, and accommodates all of the essential protective devices in the smallest possible space. Affordable simple application satisfying the hungry power requirements such as cabins, chalets, remote communication sites and small back-up power systems. Choose either roof, ground or pole mount rack which will save you both time and money. As with all Blue Pacific Solar's kits, our Technical Sales staff is standing by to provide support that is as close as your telephone.
The MidNite Classic 150 charge controller is the most versatile on the market today. In 2011 NEC required that charge controllers be equipped with arc fault protection. the Classic is the first MPPT controller that has standard arc fault protection making the Classic the safest available of our customers as well as fire departments. The Classic MPPT charge controller is the controller all the other equipment manufactures wanna be. With a amp rating from 63 to 96 amps, why would you look elsewhere?
Primus AIR 40 is an excellent choice to provide energy for off-grid homes because it is quieter, more efficient, and precision engineered to deliver more energy at lower wind speeds than any other wind generator in its class. The AIR 40 uses a new microprocessor based technology that results in an increase in performance, battery charging capability, and reliability. Additionally, "flutter" noise from the machine has been reduced. The controller allows for peak-power tracking of the wind by optimizing the alternator's output on all points of the cubic curve and efficiently delivers the energy to the battery. The turbine's smart controller allows it to actually control blade rotation speed thus eliminating the buzzing noise commonly found with most small wind turbines.
MidNite Solar's Stop Switch allows you to stop an AIR wind generator and disconnect it from the battery, all in one motion. The MN-Stop Switch comes with a neutral busbar and ground box terminal. Rated for wind turbines up to 63 amps at 150 VDC. Enclosure size: 9"H x 5"W x 4"D. Weight 3 lbs. ETL Listed for the US and Canada.
Power Center Warranty 5 Years, Prmius Wind Turbine Warranty 5 Years, Solar Panel Warranty 25 Years.
What's On The Truck
- 1 - MidNite Magnum, 120AC / 24VDC Pre-Built Power Center MNEMM1524AECL150 w/MidNite Classic 150 Charge Controller
- 4 - Canadian Solar 250 Watt PV Panels CS6P250P Black Frame (Equal or Better)
- 1 - PRIMUS Wind Turbine, 1-AR40-10-24, AIR 40 400W 24VDC (Tower Not Included See Optional Equipment Below)
- 1 - MidNite Solar Stop Switch (Code Compliant)
- 1 - Midnite Solar MNPV-3, 3 Position Combiner Box
- 2 - Midnite Solar MNEPV-15 - 15 amp DC Breaker 150VDC DIN, 13mm
- 2 - Midnite Solar MNSPD300 Lighting Arrestor (1 for Turbine, 1 for Solar Combiner Box)
- 1 - MC4 10 AWG-PV Wire - 50' cable extension
- 1 - Multi-Contact MC4 Unlocking Tool
- 6 - 1/2" Strain Relief for #10 or #12 wire
- 1 - 4/0 - 96" Battery Cables, Dual Kit (1 red, 1 black) for Power Center
- 1 - Line Drawing
Tower kit, panel racks and battery banks are not included with the base package. Scroll down the page and chooose your tower based on your site specific conditions. See racking options below or click on left hand navigation "Racking & Mounts". There are additional battery options available LH navigation near top of page.
Panels, balance of system and Primus Air 40 Turbine usually ships in 3 - 5 business days after funds clear. MidNite Magnum power centers are built to order by factory trained technicians. Allow 15 business days to ship. (Ship Times May Vary With Seasonal Increases and On Hand Inventory)
|Power Center Electrical Specifications, 120 Vac / 60 Hz ± 0.005%|
|Off-Grid / On-Grid||Yes|
|Anti-Islanding Protection||UL1741-2005/ IEEE1547|
|Output Waveform||Modified Sine Wave|
|Battery Voltage (Nominal)||24 Vdc|
|Recommended Minimum Battery Capacity||200 Amp-hours|
|Maximum Solar Array Wattage||4000 W/STC|
|Certifications||Listed by ETL for US and Canada|
|Warranty||5-year Warranty Standard|
Magnum inverters are on-grid but will not export excess power. Inverters can use either the utility grid or fossil fuel generator to recharge a battery bank in conjunction with the MidNite Classic 150 charge controller.
Modified sine wave inverters may not run: Laser printers, photocopiers, and anything with an electrical component called a thyristor; Anything with a silicon-controlled rectifier (SCR) like those used in some washing machine controls; Some laptop computers (Apple Products can be particularly fussy about their energy source); Some fluorescent lights; Some new furnaces and pellet heaters with microprocessor controls; Digital clocks with radios; Appliances having speed controls; Medical equipment should not be power with modified sine wave inverters. Because the total harmonic distortion is higher in modified sine wave inverters, you may hear a buzzing from your stereo system and you might see lines on your TV screen.
Optional Deep Cycle Battery Choices; Trojan / UPG / Rolls
Choose the off-grid battery option that best fits your needs. The size of the battery bank you choose depends on the amount of power you require (Watts), the amount of time each day you expect to run your appliances, equipment and lights, and your location or available sunlight. As a rule-of-thumb, when considering batteries off-grid, use 3 days of autonomy (No Sun) as a minimum and 50% depth of discharge for your battery bank.
|Battery Cable Pairs (RED/Black)||Length||Color||Part #||Price|
|2/0 - Battery Cables||12"||1 Red/1 Black||BP9850022|
|2/0 - Battery Cables||18"||1 Red/1 Black||BP9850012|
|Optional Roof or Ground Rack||Part #||Price|
|1 Set Basic IronRidge Ground Racking Option D (6 Rack Sets Required for 6 Solar Panels)||BP6932304|
1 Set Basic IronRidge Roof Mount Racking Option D
(6 Rack Sets Required for 6 Solar Panels)
|Inverter Options||Description||Part #||Price|
|ME-AGS-N||Automatic Generator Start WORKS WITH;
ME Series, MM Series, MMS Series, MS Series, MS-PAE Series, RD Series
Primus Tower Kits (Options)
AIR tilt-up tower kits are available as hardware kits (not including the tower pipe) in 27' (8.1m) and 45' (13.5m) heights, and in a 29' (8.8m) EZ Tower™ kit that includes the pipe for the tower. All towers use a 4-guy-wire set-up, and are assembled on the ground with the wind generator and tilted up into place.
The 27' and 45' tower kits come with all the hardware necessary to install a tower, except guy-wire anchors, pipe, and concrete. All parts bolt or clamp together and no welding is required. Purchase 1-7/8" steel tubing from a local chain link fence supplier (for up to 90mph at 27', or 70mph at 45'), or use 1.5" Sch 40 Galvanized water pipe (1-7/8" OD and up to 120mph at 27' and 90mph at 45'), to build the tower. These tower kits include a simple elbow/tee for its basethat, when combined with a short length of pipe, eliminates the need for a concrete pad, a base plate and a swivel for the base of the tower. Two people are required to erect one of these towers, but no winches or vehicles are needed.
The 29' EZ Tower™ kit comes with all the parts you'll need, including Galvanized tubing, cable and hardware. This tower uses lightweight tubing while providing plenty of strength to withstand winds up to 110mph. Two people can easily erect the EZ Tower™ without winches or vehicles. The EZ Tower™ includes a simple yet effective tower base and anchoring system which eliminates the need for a concrete pad. The kit comes with guy-wire anchors that are driven into the ground (depending on the soil conditions, concrete may be necessary for proper guy anchoring). Ships via UPS anywhere in one 74' (1.9m) box weighing 80lbs.
AIR towers are PE stamped and approved for the California buy-down program. Contact us for wet seal stamps (additional cost).
Tower kits usually ship in 3 to 5 business days.
Screw-in "auger" type guy anchors can be used in loamy and gravelly soils. Other soil types may require concrete footings or expansion bolts. Consult an engineer or geologist if you have questions about guy supports.
**Freight Shipping is Dock to Dock
In circumstances where we have to ship by freight, free or otherwise, that means dock to commercial dock (not residential) to any of the lower 48 states. If the customer does not specify a local commercial dock that is available, we will ship to the nearest terminal where the shipment will be held for will call pick up by the customer. If you choose to have your order shipped to your residence, most orders require special handling for unloading and the pallet has to be transferred to a truck with a lift gate. In most cases, truck freight companies do NOT require their drivers to unload shipments. An additional "Residential" as well as a "Lift Gate" special handling fee will apply if the driver unloads the merchandise to the curb at your residence. The special handling fee is $89.00 and is available at checkout. If you have selected this add on service, the shipping carrier will call and schedule delivery of your solar kit, (provided the weight and dimensions of the product fits the criteria for lift gate service). You can avoid the residential and lift gate fees by arranging a "Will Call" pickup at the closest freight company terminal. In that case, you will need a pickup truck, a copy of the bill of laden, and a photo ID. When you arrive at the freight company terminal, the freight company will load your order into the bed of the truck with their forklift. The most common pallet size = 65" X 44" (Height depends on Product). Be sure and check for hidden damage.
|Input battery voltage range||9 - 16 VDC||9 - 16 VDC||18 - 32 VDC|
|Nominal AC output voltage||120 VAC ± 5%||120 VAC ± 5%||120 VAC ± 5%|
|Output frequency and accuracy||60 Hz +/- 0.1%||60 Hz +/- 0.1%||60 Hz +/- 0.1%|
|1 msec surge current (amps AC)||27||42||45|
|100 msec surge current (amps AC)||11||23||24|
|5 sec surge power (real watts)||1100||2100||2650|
|10 sec surge power (real watts)||1050||1900||2575|
|30 sec surge power (real watts)||1000||1750||2500|
|5 min surge power (real watts)||950||1550||2350|
|30 min surge power (real watts)||675||1525||1900|
|Continuous power output at 25° C
(with 1.0 power factor)
|600 VA||1500 VA||1500 VA|
|Continuous current output||5.0 AAC||10.0 AAC||13.0 AAC|
|Maximum input battery current||80 ADC||200 ADC||100 ADC|
Inverter efficiency (peak)
|16 msecs||16 msecs||16 msecs|
Search mode (typical)
|3 watts||6 watts||4 watts|
|No load (120 VAC output, typical)||10 watts||18 watts||9 watts|
|Waveform||Modified Sine Wave||Modified Sine Wave||Modified Sine Wave|
Specifications - Charger
|Continuous output at 25° C||30 A DC||70 A DC||35 A DC|
|Power factor||> 0.95||> 0.95||> 0.95|
|Input current at rated output||4 AAC||9 AAC||9 AAC|
|Transfer relay capability||20 AAC (input current for charging and pass through)|
|Battery temperature compensation||Yes, 15 ft Battery Temp Sensor standard|
|Remote available (optional)||Yes, MM-RC25 or ME-RC50|
|Internal cooling||0 to 59 cfm variable speed|
|Overcurrent protection||Yes, with two overlapping circuits|
|Overtemperature protection||Yes on transformer and MOSFETS|
|On/off with status indicator||Yes, front mounted and easily accessible|
|Low battery cutout||10 or 20 VDC, adjustable on most models with the ME-RC50 remote|
|AC output and input||Hardwire||Hardwire||Hardwire|
|Output circuit breaker||7 A switchable||12 A switchable||12 A switchable|
|Input circuit breaker||8 AAC switchable||20 AAC switchable||20 AAC switchable|
|Warranty||Two (2) years|
|Operating temperature||-20° C to +60° C (-4° F to 140° F)|
|Nonoperating temperature||-40° C to +70° C (-40° F to 158° F)|
|Operating humidity||0 to 95% RH non condensing|
|Dimensions (L x W x H)||16.6” x 8.4” x 4.7” (42 cm x 21 cm x 12 cm)|
|Mounting||Shelf (top or bottom up) or wall (vents up)|
|Weight||16 lb (7.3 kg)||22 lb (10 kg)||22 lb (10 kg)|
|Shipping weight||18 lb (8.2 kg)||24 lb (10.9 kg)||24 lb (10.9 kg)|
|Max operating altitude||15,000’ (4570 m)|
|Construction||ABS plastic top and cast aluminum bottom|
|MidNite Solar Classic Charge Controllers|
|Classic 150||Classic 200||Classic 250||Classic 250KS|
|Operating Volts In||150VDC||200VDC||250VDC||250VDC|
|*Max Hyper VOC||150+ battery||200+ battery||250+ battery||250+ battery|
|Nominal Battery Volts||12-72||12-72||12-72||12-120|
|**Absolute Current Output at 25° C||
94a @ 24v battery
83a @ 48v battery
74a @ 12v battery
70a @ 24v battery
65a @ 48v battery
60a @ 12v battery
62a @ 24v battery
55a @ 48v battery
|40a @ 120v battery|
|De-Rate Current @ 40° C||80 amperes||60 amperes||52 amperes||33 amperes|
|Environment||-40° C to 40° C|
|Classic Dimensions||14.87” x 5.95” x 4.00” (378 mm x 151 mm x 102 mm)|
|Boxed Dimensions||19.00” x 8.50” x 5.70” (378 mm x 151 mm x 102 mm)|
|Shipping Weight||11.5 lb (4.9 kg)|
NOTE: Current output ratings were measured with 75% of the PV array’s VOC (Open Circuit Voltage)
Hybrid Solar Wind Kit Prim1524AE-1000 Pre-wired Power Center / Canadian Solar Panel / Primus Wind Turbine System
Hybrid Solar Wind kit employs some of the best off-grid power equipment available. MNEMM1524AECL150 Magnum / MidNite e-panels are solid-state electronic devices that, when sized properly, can be used in nearly every solar and system that uses batteries. The Power Centers and wind turbines Blue Pacific Solar sells employ the latest in power electronics to regulate the battery charge by controlling the charging voltage and current from a solar panel array and wind generator. Power centers with inverter chargers and charge controllers regulate the charge of the battery, but also prevent the battery from being over discharged which can damage the battery bank.
The Canadian CS6P245P is a robust solar panel with 60 solar cells. These panels can be used for on-grid or off-grid solar applications. Canadian Solar's meticulous design and production techniques ensure a high-yield, long-term performance for every module produced.
Primus Air Small Wind Turbines; AIR wind turbines allow you to harness the wind's energy to charge an off-grid batter bank. The best-selling small wind generators in the world, AIR turbines are great for remote cabins, and other remote platforms. The AIR wind turbine incorporates a three-phase brushless permanent magnet alternator and integrates microprocessor-based charge controller to optimize its power production capability. The microprocessor continuously adjusts the loading of the alternator to keep the turbine operating efficiently in most wind regimes.
IMPORTANT SAFETY INSTRUCTIONS: (OK, here is the scary legal disclaimer.) It is the responsibility of the purchaser to ensure that all products are installed and operated in accordance with local and national building codes as specific by the NEC (National Electric Code), UBC (Uniform Building Code) or IBC (International Building Code) and local utility company policy. This product is designed for indoor or protected compartment installations. DO NOT expose the power center to rain, snow, moisture or liquids of any type. Use insulated tools to reduce the chance of electrical shock or accidental short circuits. Remove all jewelry such as rings, watches, bracelets, etc. when installing the MidNite Magnum Power Center or any other electronic gear. Always disconnect the batteries or energy source prior to installation or performing maintenance on the MidNite Magnum Power Center inverter. Live power may be present at more than one point since an inverter utilizes both batteries and AC electricity. Always verify proper wiring prior to starting the inverter. Do not operate the system if it has been damaged. Always read and follow the manufactures installation and operating instructions for the Hybrid Solar Wind Kit Prim1524AE-1000 off-grid kit prior to installation and operation.