Hybrid Wind Solar Kit
Primus Windpower; Magnum Energy

Primus Windpower

web solarStore

 

 

  • Blue Pacific Solar Products, Inc. BBB Business Review

 

Hybrid 3120W Wind Solar Off-Grid Kit Primus Magnum MNEMS4024PAECL150

mppt
    remote cabin
  • 1 kW Off-grid Package
  • The Primus Magnum DIY (Do-it-yourself) hybrid kit with MidNite MNEMS4024PAECL150 power center & Primus AIR 40 wind turbine. This package is a hybrid wind system that is engineered to make installation faster and easier for off-grid or backup applications. Primus AIR 40 is the premier micro-wind turbine for land-based applications. It operates efficiently across a wide-range of wind speeds and is ideal for pairing with solar to offset seasonal variation, delivering more consistent energy. The Magnum inverter produces pure sine wave clean electricity drawing power from the energy stored in a battery bank. Mechanically and electrically engineered, every component has been specially selected to assure the highest performance with this safe simple-to-install kit. Our off-grid hybrid kits are the ideal for applications with small to medium power requirements such as off-grid cabins, homes and back-up power systems.
  • Only: Buy Now
  • Product Details:
  • Specifications:
  • Videos:
  • Resource Documents:

Primus Wind Turbine Magnum MidNite E-Panel Hybrid Battery Based Energy System

Power Center /
Primus Windpower
Part Number Array Size Watts (STC*) Daily Array Watts Based on 5 Sun Hours (*STC) //
Wind Daily Watts @ 13 MPH
Voltage
DC (Bat) / AC
Type Magnum Inverter
Continuous AC Output Watts
Magnum Inverter
Continuous AC Output Current
MidNite Magnum
MNEMS4024PAECL150 /
Primus AIR 40
PRIMAG-24-3120 3,120W 15,600W (*STC)
1,440 Watts
24VDC / 120 | 240 Off-Grid
On-Grid**
4,000 @ 240VAC 30AAC

*STC = "Standard Test Conditions" Definition

FWPV**On-Grid Definition - Utility grid power is available for use and the system is will interact with the utility grid but is not capable of exporting (selling) electricity back to the utility grid. System will also interact with generator but not with the generator and grid at the same time.

magnum

Select the right size off-grid kit that fits your daily energy budget in either a 24 or 48 volt battery system. This Magnum Energy /MidNite Solar kit is expandable, and accommodates all of the essential protective devices in the smallest possible space. Affordable simple application satisfying the hungry power requirements such as cabins, chalets, homes, remote communication sites and back-up power systems. Utilizing an extremely compact design and an easy-to-install mounting bracket, the fully pre-wired and factory tested Magnum power center is designed for a quick installation. Choose either roof, ground or pole mount rack which will save you both time and money. As with all Blue Pacific Solar's kits, our Technical Sales staff is standing by to provide support that is as close as your telephone.pre-engineered

Trina Solar Panels; founded in 1997 with over 20 offices worldwide and 13,700 employees, Trina modules are UL certified and named by EuPD Research as the "Top Brand PV" in Germany in 2013. Photovoltaic projects rely on high quality products that stand the test of time for project inputs ranging from engineering to design to financing and more. Relative to industry peers, Trina products have a strong 18 year track record of reliability and performance in the field. As a vertically integrated company, Trina tightly controls quality at every step from silicon crystallization to module deployment in the field with 30 in-house quality tests. Trina Solar panel quality is guaranteed by a 25-year industry leading warranties and are UL Listed.

This MidNite Magnum MNEMS4024PAECL150 is an advanced electronic device that takes DC (Direct Current) voltage from your batteries and turns it into both 120V and 240V AC (Alternating Current) voltage, which is needed to power your household electrical appliances (i.e. AC loads). The E-panel power center comes standard with the MidNite Classic 150 charge controller. MidNite Classic charge controllers are the most powerful MPPT charge controller on the market today. With the Classic you have built in arc fault protection and full internet capability with remote displays. ETL listed the Classic is made in America. All installations must comply with national and local electrical codes; professional installation is recommended. The NEC in the USA requires a DC ground fault interrupter for all residential PV (Solar) installations. NEC2011 requires an ARC FAULT detector on all charge controllers and inverters operating above 80VDC. Both of these devices are built into the Classic.

The MNEMS4024PAECL150 power center also includes a inverter battery charger circuit that takes AC power (When connected to your utility OR generator power) and transforms it into DC power to recharge your batteries from the inverter while the Classic 150 is charging the batteries from the solar array.

Magnum inverters are installed on the MidNite MNE175STM-L -240 white steel E-Panel (MidNite Magnum MNEMS4024PAECL150 power center) which include 1 Magnum MS4024PAE inverter / charger (Depends on 24VDC or 48VDC), ME-ARC50 remote display, a MidNite Classic 150 charge controller for up to 18 panels and two Classic 150 controllers for systems with more than 18 panels, WBjr current sense module for Classic provides the battery state of charge. 2 MNEDC panel mount breakers 175 amp Battery Main Breaker, DC-GFP built into the Classic, Arc Fault Detector built into the Classic, 3 MNSPD (Surge Protection Devices), 1 MidNite BTS (Battery Temperature Sensor), 1 Magnum BTS. Additionally, we supply (installed by others) 1 MidNite Solar, circuit breaker, DIN Mount, 30A, 2-pole, 120/240VAC, UL1077, MNEAC30-2P for additional AC out protection.

Available in 4024 (24 volts; 4000 watt output) and 4448 (48 volts; 4400 watt output) watt models, the Magnum MS-PAE Series inverters are powerful, easy-to-use and ETL listed to the stringent requirements of UL 1741 and CSA C22.2 No. 107.1-01 for renewable energy installations. MidNite Magnum MNEMS4024PAECL150 power centers are a superior choice when you need a fully integrated, true sine wave, reliable 120V/240V power system. Power Center Warranty 5 Years, Solar Panel Warranty 25 Years.

MidNite Solar's Stop Switch allows you to stop an AIR wind generator and disconnect it from the battery, all in one motion. The MN-Stop Switch comes with a neutral busbar and ground box terminal. Rated for wind turbines up to 63 amps at 150 VDC. Enclosure size: 9"H x 5"W x 4"D. Weight 3 lbs. ETL Listed for the US and Canada.

Primus Air Small Wind Turbines; AIR wind turbines allow you to harness the wind's energy to charge an off-grid batter bank. The best-selling small wind generators in the world, AIR turbines are great for remote cabins, and other remote platforms. The AIR wind turbine incorporates a three-phase brushless permanent magnet alternator and integrates microprocessor-based charge controller to optimize its power production capability. The microprocessor continuously adjusts the loading of the alternator to keep the turbine operating efficiently in most wind regimes.

The AIR 40 in these hybrid solar kits provides energy for off-grid homes or cabins with modest energy needs and have average annual wind speeds under 15 mph. It has a bare aluminum finish for use in non-corrosive environments, so it is not suitable for marine use. Rated power: 160 W at 28 mph (12.5 m/s). CSA Listed for the U.S.A. Primus AIR 40 weight is 13 lbs., has a 46" rotor diameter (11.5 ft2 swept area) and mount on a 1.5" Schedule 40 steel pipe (1 7/8" [48 mm] outer diameter (Not included in base kit, see options)). Made in U.S.A. All AIR models have a 5-year limited warranty. Magnum kits

What's On The Truck

  • 1 - MidNite Magnum Pre-built Power Center MNEMS4024PAECL150 120/240 VAC Off-Grid 4000 Watt 24VDC Inverter with 1 MidNite Classic 150 Charge Controller
  • 12 - 260 Watt Trina Solar Panels, Poly, Black Frame, TSM-260PD05hybrid kit
  • 1 - PRIMUS Wind Turbine, 1-AR40-10-24, AIR 40 400W 24VDC (Tower Not Included See Optional Equipment Below)
  • 1 - MidNite Solar, MNSTOPSWITCH, Stop Switch for Wind Turbines, 63AMP 150VDC
  • 1 - MidNite Solar MNPV-6, 6 Position Combiner Box
  • 6 - MidNite Solar MNEPV-15 - 15 amp DC Breaker 150VDC DIN, 13mm
  • 1 - MidNite Solar MNSPD-300-DC Surge Protector Device (Lighting Arrester)
  • 1 - *MidNite Solar, Circuit Breaker, DIN Mount, 30A, 2-pole, 120/240VAC, UL1077, MNEAC30-2P
  • 6 - 50' PV Wire, 10AWG, UL4703 600VDC; Male/Female MC4 Connectors
  • 1 - Multi-Contact MC4 Unlocking Tool
  • 14 - Strain Relief, Cord Grip, 1-Hole for 5 to 12mm (.200” - .472”) OD Wire, 1/2” with locknut
  • 1 - Multi-Contact MC4 Latch Tool
  • 2 - Inverter Battery Cables, Code Approved THW, 2/0 x 10' (ft.) (1 red, 1 black)
  • 1 - Line Drawing; Full Instructive Three-Line Diagram of Entire DC Circuit, as Well as AC Lines to Your Main Panel.

dcPanels and balance of system ship in 3 - 5 business days after funds clear. MidNite Magnum MNEMS4024PAECL150 power centers are built to order by factory trained technicians. Primus Windpower AIR 40 are a stock item but because of their popularity they may be drop shipped direct from the factory. Allow 10 business days to ship for MidNite Magnum MNEMS4024PAECL150 power centers & Primus Wind Turbines. (Subject to Seasonal Increases)

combiner* (MNEAC30-2P Included) 30A/2P Breaker installed on power center on site by others for supplementary protection. These breakers are rated for continuous duty and are usually used as AC out disconnects as specified on the line drawing supplied.

turbine optionsTower kit, panel racks and battery banks are not included with the base package because they are site specific options. Scroll down the page and choose your tower based on your site specific conditions.

acRoof or ground racks and batteries are not included in the base price of the kit because they are site specific options. Mounting on the roof or ground, types of attachment are individual's specific property requirements. There are options below for racking (roof or ground), and batteries to accommodate nearly every application you might encounter.

roof rack ground rack
battery cables
turbine kwh
Optional Accessories Part # Price  
1 Set Basic IronRidge Roof Racking Option D (1 Rack Set Required Per Solar Panel 4 Panel MIN)

NOTE: Checkout Default Price Decreases in Segments As Per Unit Quantity Increases. ironridge solar racks
BP6932304solar roof rack
Qty
1 Set Basic IronRidge Ground Racking (1 Rack Set Required Per Solar Panel 4 Panel MIN)

NOTE: Checkout Default Price Decreases in Segments As Per Unit Quantity Increases.dpw
BP6932304solar ground rack
Qty
Arrh! More Power? Upgrade to American Made SolarWorld, 275W PV Module, Black 2.5 Frame, Mono, IQ1120 mppt

(Add 1 Upgrade Per Panel. Example: 10 Panel Kit Upgrade = Add 10 Sets) SolarWorld panels are designed and manufactured in the U.S.A.
1100955UPsolar charger
Qty
ME-AGS-N Magnum Automatic Generator Start WORKS WITH; ME Series, MM Series, MMS Series, MS Series, MS-PAE Series, RD Seriesmppt BP2911442solar charger
Qty
Magnum Energy ME-BMK-NS Battery Monitor Kit with Breaker Installed on Power Center - Monitoring your battery bank is easy with the Battery Monitor Kit (ME-BMK)* from Magnum Energy. Acting as a “fuel gauge” for your batteries, the ME-BMK monitors their state of charge (SOC) and then provides this information in an easy-to-understand display via the ME-ARC or ME-RC remotes. With accurate SOC readings, you can avoid unnecessary battery recharging, saving on fuel and long-term maintenance costs.mppt 02006380solar charger
Qty
ME-MW-W connects the Magnum system to the internet for remote monitoring via the data.magnumenergy.com site. The ME-MW-W will communicate to your broadband router via a wireless bridge. Maximum range for the wireless is up to 300' if unobstructed. There is both a transmitter and receiver gateway that wires to your network. The receiver gateway requires 120 VAC power. Units is supplied with all the needed cables.mppt 02908000solar charger
Qty

dcBlue Pacific Solar has provided all of the main parts you will need for your kit. Racks and batteries are site specific options that are not included with the base package. Additionally some additional items sourced from your local hardware store that your may need to purchase are: Conduit, appropriately sized electrical wire from the array, some fasteners, sealant, grounding rod and wire to complete the final connection to your main panel or sub panel.

 

Primus Tower Kits (Options)made america

 

AIR tilt-up tower kits are available as hardware kits (not including the tower pipe) in 27' (8.1m) and 45' (13.5m) heights, and in a 29' (8.8m) EZ Tower™ kit that includes the pipe for the tower. All towers use a 4-guy-wire set-up, and are assembled on the ground with the wind generator and tilted up into place.

The 27' and 45' tower kits come with all the hardware necessary to install a tower, except guy-wire anchors, pipe, and concrete. All parts bolt or clamp together and no welding is required. Purchase 1-7/8" steel tubing from a local chain link fence supplier (for up to 90mph at 27', or 70mph at 45'), or use 1.5" Sch 40 Galvanized water pipe (1-7/8" OD and up to 120mph at 27' and 90mph at 45'), to build the tower. These tower kits include a simple elbow/tee for its basethat, when combined with a short length of pipe, eliminates the need for a concrete pad, a base plate and a swivel for the base of the tower. Two people are required to erect one of these towers, but no winches or vehicles are needed.

The 29' EZ Tower™ kit comes with all the parts you'll need, including Galvanized tubing, cable and hardware. This tower uses lightweight tubing while providing plenty of strength to withstand winds up to 110mph. Two people can easily erect the EZ Tower™ without winches or vehicles. The EZ Tower™ includes a simple yet effective tower base and anchoring system which eliminates the need for a concrete pad. The kit comes with guy-wire anchors that are driven into the ground (depending on the soil conditions, concrete may be necessary for proper guy anchoring). Ships via UPS anywhere in one 74' (1.9m) box weighing 80lbs.

AIR towers are PE stamped and approved for the California buy-down program. Contact us for wet seal stamps (additional cost).

primus Optional
Tower Kit & Turbine
Item #   Data Sheet Discription Price  
 1-TWA-10-01 01601086 air 40 tower kit 27' AIR Guyed Tower Kit (Pole Not Included) See Data Sheet for Included Parts List.
Qty
 1-TWA-10-02 01601092 air 40 tower kit 45' AIR Guyed Tower Kit (Pole Not Included) See Data Sheet for Parts Included List.
Qty
 1-TWA-11-01 01601081 air 40 tower kit 29' EZ Tower kit Including Pipe and Anchors See Data Sheet for Parts Included List.
Qty
 1-TWA-12-01 01601113 air 40 tower kit 36" Auger – Set of 4; Use with 24' & 27' Towers (Ship from MFG)
Qty
1 - Primus 1-AR40-10-24
1 - MidNite Solar Stop Switch
1 - MNSPD300 Lighting Arrestor
01601039A air 40 tower kit 1 - Primus AIR 40 Wind Turbine, 1-AR40-10-24 24VDC (Tower Not Included); 1 - MidNite Solar Stop Switch; 1 - Midnite Solar MNSPD300 Lighting Arrestor
Qty

magnum shipTower kits usually ship in 3 to 5 business days subject to seasonal increases.

magnum shipScrew-in "auger" type guy anchors can be used in loamy and gravelly soils. Other soil types may require concrete footings or expansion bolts. Consult an engineer or geologist if you have questions about tower guy supports.

magnum midnite
magnum midnite

Hybrid 3120W Wind SolarPRIMUS MAGNUM KIT MNEMS4024PAECL150; DO-IT-YOURSELF PACKAGE

Hybrid 3120W Wind Solar Primus Magnum Kit with MNEMS4024PAECL150 power center and Air 40 wind turbine are solid-state electronic devices that, when sized properly, can be used in nearly every off-grid solar application that uses batteries. The AIR wind turbine incorporates a three-phase brushless permanent magnet alternator and integrated microprocessor-based charge controller to optimize its power production capability. The microprocessor continuously adjusts the loading of the alternator to keep the turbine operating efficiently in most wind regimes.

building coderesidential

NOTE, IMPORTANT INSTALLATION: It is the responsibility of the purchaser to ensure that all products are installed and operated in accordance with local and national building codes as specific by the NEC (National Electric Code), UBC (Uniform Building Code) or IBC (International Building Code) and local utility company policy. These codes may vary from city to city and county to county. All Hybrid 3120W Wind Solar Primus Magnum Kit MNEMS4024PAECL150 off-grid or backup solar installations should be permitted and inspected, where required, by the local inspection authority in the same manner as other equivalent electrical systems. Blue Pacific Solar recommends you contract with a local licensed electrician to do the final electrical connection of your solar system from the AC disconnect to your main breaker box. If you need help with the permitting documents for your kit, we are here for you. Solar permit service add on is available at checkout. Additional Safety Instructions; perform all electrical installations in accordance with all applicable local electrical codes and the National Electrical Code (NEC), ANSI/NFPA 70. Do NOT disconnect the solar panel while the panels are under loads.

This Hybrid Primus Wind 3120W Solar Kit with MidNite Magnum MNEMS4024PAECL150 off-grid power center is an affordable expandable do-it-yourself (DIY) high quality solution for your home, cabin or backup application.